Naziv
Koda izdelka
Testna napetost
Nazivni presek vodnika (mm2)
Min. zunanji premer
Cena
Količina
+
NAYY-J 4x50 SE 0,6/1kV
1552011
4 kV
50 mm2
28 mm
5,89 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-J 4x70 SE 0,6/1kV
1552012
4 kV
70 mm2
32 mm
7,81 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-J 4x95 SE 0,6/1kV
1552013
4 kV
95 mm2
36 mm
8,91 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-J 4x150 SE 0,6/1kV
1552015
4 kV
150 mm2
43 mm
12,93 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-J 4x240 SE 0,6/1kV
1552017
4 kV
240 mm2
/
21,09 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-O 1x300 RM 0,6/1kV
1552022
4 kV
300 mm2
/
6,81 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-O 1x70 RM 0,6/1kV
3036547
4 kV
70 mm2
/
1,94 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Rok dobave sporočimo po obdelavi naročila.
+
NAYY-O 1x95 RM 0,6/1kV
3036548
4 kV
95 mm2
/
2,51 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Rok dobave sporočimo po obdelavi naročila.
+
NAYY-O 1x120 RM 0,6/1kV
3036549
4 kV
120 mm2
/
3,01 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-O 1x150 RM 0,6/1kV
3036550
4 kV
150 mm2
/
3,58 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-O 1x185 RM 0,6/1kV
3036551
4 kV
185 mm2
/
4,39 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-O 1x240 RM 0,6/1kV
3036552
4 kV
240 mm2
/
5,63 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
NAYY-O 1x50 RM 0,6/1kV
1550056
4 kV
50 mm2
/
1,48 €
*
Min. količina za naročanje: 10000
Na zalogi, predviden rok dobave 5-8 delovnih dni.

Benefits

  • VDE-certified cable with ?VDE? testing mark for proven reliability and quality.
  • Insulated aluminium conductors are single or multi-wire, round or sector-shaped.
  • Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection at www.lappkabel.de/cpr.
  • Aluminium conductors are lighter and cheaper than copper conductors. They achieve comparable conductivity, provided that at least one to two larger conductor cross-sections are selected.
  • A common core wrapping made of a filling compound ensures additional strength of the cable.
  • Suitable for direct underground installation thanks to tough insulation and sheath material (PVC). The robust materials protect against harmful environmental influences and chemicals.

Applications

  • Power and control cable for fixed installation in the following applications:
  • For indoor and outdoor use
  • In concrete with a temperature below the maximum cable operating temperature of +70 °C according to the VDE standard HD 603/VDE 0276-603 - Part 3-G (point 4) governing PVC cables for direct burial
  • Burial without additional, suitable underground protection according to VDE standard HD 603/VDE 0276-603 - Part 3-G (point 4) governing PVC cables for direct burial: normal minimum installation depth 0.6 m, but at least 0.8 m under roads
  • For fixed installation in water, air, earth and concrete. In the ground, the minimum installation depth without additional, suitable protection is 0.6 m, and at least 0.8 m under roads.
  • Suitable for medium mechanical stress.
  • Suitable for outdoor use, subject to the temperature range.
  • Can be used in dry, damp or wet environments.
  • Can be used universally for connecting the power supply in buildings and industrial facilities.
  • Suitable for energy distribution in power and converter stations.

Notes

  • Please find our standard lengths at: www.lappkabel.de/kabel-standardlaengen.
  • If applicable, the prices are solid metal prices without surcharges and VAT. Sales only to business customers.
  • Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
  • Photographs and graphics are not to scale and do not represent detailed images of the respective products.
  • Trade product, not a LAPP product.

KONTAKTIRAJTE NAS

Pošljite nam E-mail ali pa nas pokličite na +386 2 42 13 550